Home / Siding replacement cost / Derry, NH

Derry · Rockingham County · labor +24.2%

Siding replacement cost in Derry, NH

A 1,500 sq ft siding job in vinyl siding comes to about $6,750 to $20,200 in Derry once the national installed price is adjusted for what carpenters earn locally. The town's fee schedule has no separate line for it, but its general residential rate puts the permit at $102.25 for a job at the midpoint.

Figures checked October 21, 2026 · sources

123
  1. 1Vinyl, 1,500 sq ft $6,750–$20,200
  2. 2Labor index +24.2% vs US
  3. 3Derry permit $102.25
Estimate, 1,500 sq ft
$6,750–$20,200
Midpoint $13,450. National range $6,000–$18,000.
Derry permit
$102.25
$68.63 at the low estimate, $135.88 at the high one.
Labor index (carpenters)
+24.2%
Boston-Cambridge-Newton median $36.16/hr vs US $29.12.

Change size or material All Derry projects

Siding replacement prices in Derry by material

Each row starts from the installed price per square foot of wall published in a national cost guide, then moves only the labor part of that price by Derry's labor index. For 1,500 sq ft:

MaterialNationalDerryMidpoint
Vinyl siding$6,000–$18,000$6,750–$20,200$13,450
Fiber cement siding$9,000–$22,500$9,750–$24,700$17,200
Engineered wood siding$10,500–$18,000$11,250–$20,200$15,700
Cedar siding$9,000–$24,000$9,750–$26,200$17,950
Vinyl$6,750–$20,200Fiber cement$9,750–$24,700Engineered wood$11,250–$20,200Cedar$9,750–$26,200
Siding replacement in Derry, NH, for 1,500 sq ft: low and high estimate by material after the local labor factor. Bars to scale on one axis from $0.

By size

Wall area to side (sq ft)Derry estimatePermit at midpoint
1,000 sq ft$4,500–$13,450$79.84
1,500 sq ft$6,750–$20,200$102.25
2,000 sq ft$8,950–$26,900$124.67
2,500 sq ft$11,200–$33,650$147.09

Vinyl siding.

Permit fee in Derry

General rate The fee schedule has no separate line for this work; the town's general residential building-permit rate is shown as what it would charge if the building department requires a permit for it.

“108.2.1: application fee of $35 for residential and $45 for commercial plus an additional fee of $5 per $1,000 of construction cost.”

Applied to a 1,500 sq ft siding job estimated at $6,750 to $20,200, that gives $68.63 to $135.88, about 0.76% of the midpoint price. Among the 15 towns on this site whose schedules cover this work, Derry ranks 3 from the cheapest; Newport is lowest at $100 and Hartford highest at $413.38 for its own midpoint job.

Newport$100Salem$100Derry$102.25Portsmouth$110Exeter$117.25Manchester$120.72Londonderry$132.60Rochester$136Durham$144.15Somersworth$146.05Boston$154.51Lebanon$160.65Worcester$168Nashua$245Hartford$413.38
Permit fee each town's schedule gives for the midpoint siding job estimate in that town (1,500 sq ft). Bars to scale from $0; "from" marks a minimum fee.

Schedule: Town of Derry Code, Chapter 30 Building and Property Maintenance Codes, § 30-4 (effective 1-3-2017, amended 5-15-2025). The building department decides whether a permit is required and what valuation it accepts; the national guide puts siding job permits at $30–$200.

Why Derry differs from the national price

Derry is in Rockingham County, which the Bureau of Labor Statistics counts in the Boston-Cambridge-Newton, MA-NH metropolitan area (mostly Massachusetts). The median wage there for carpenters is $36.16 an hour against $29.12 nationally, so the labor part of a national price is scaled by 1.242 (+24.2%). That area is mostly Massachusetts; the New Hampshire statewide median for the same trade is $29.42, so a Derry quote may land nearer the low end of the range shown.

On this job the labor portion is $3,000 to $9,000 at national rates and $3,750 to $11,200 at Derry rates, so the midpoint rises $1,450 above the national figure. Against the New Hampshire statewide wage it is $1,400 higher. Materials are priced at the national figure: shingle, lumber and equipment prices are set by distributors, not by a town.

A second published benchmark points the same way for the region: Remodeling's 2025 Cost vs Value report prices its “Siding Replacement, Vinyl” job at $17,950 nationally and $17,600 in New England, and its “Siding Replacement, Fiber-Cement” job at $21,500 nationally and $20,700 in New England. Those are fixed specification jobs, not per-square-foot prices, so they are shown for comparison only.

Derry at a glance

Derry had 34,691 residents in the state's 2025 estimate, up 4.8% from 33,109 in 2010, slower than the state's 7.5%. Its density of 973 people per square mile puts it 9 of 24 among the towns on this site.

The Census Bureau's QuickFacts page for Derry covers only the Derry census-designated place, not the whole town, so its housing figures are not used here.

Taking off the old siding

Remove the old siding adds $0.70 to $2 per sq ft nationally (“$0.70 to $2.00 per square foot (old siding removal)”). That work is all labor, so at Derry's index it is $1,300 to $3,750 for 1,500 sq ft, on top of the estimate above.

Before asking for quotes

Other projects in Derry

Roof replacement cost in Derry · Deck building cost in Derry

Siding replacement in nearby towns

TownLabor areaEstimatePermit
BostonBoston-Cambridge-Newton$6,750–$20,200$154.51
DurhamBoston-Cambridge-Newton$6,750–$20,200$144.15
ExeterBoston-Cambridge-Newton$6,750–$20,200$117.25
LondonderryBoston-Cambridge-Newton$6,750–$20,200$132.60
PortsmouthBoston-Cambridge-Newton$6,750–$20,200$110

More: all siding replacement town pages · siding replacement cost in New Hampshire · permit fees by town · labor costs in New Hampshire

Sources

All figures checked October 21, 2026. Estimates are ranges built from published averages, not quotes; a contractor's price depends on the house, access, the season and the scope written into the quote. Cost by Town does not perform or arrange work.