Home / Deck building cost / Exeter, NH

Exeter · Rockingham County · labor +24.2%

Deck building cost in Exeter, NH

A 320 sq ft deck in pressure-treated pine deck comes to about $8,850 to $17,700 in Exeter once the national installed price is adjusted for what carpenters earn locally. The town's fee schedule has no separate line for it, but its general residential rate puts the permit at $116.38 for a job at the midpoint.

Figures checked October 20, 2026 · sources

123
  1. 1Pressure-treated, 320 sq ft $8,850–$17,700
  2. 2Labor index +24.2% vs US
  3. 3Exeter permit $116.38
Estimate, 320 sq ft
$8,850–$17,700
Midpoint $13,300. National range $8,000–$16,000.
Exeter permit
$116.38
$94.25 at the low estimate, $138.51 at the high one.
Labor index (carpenters)
+24.2%
Boston-Cambridge-Newton median $36.16/hr vs US $29.12.

Change size or material All Exeter projects

Deck building prices in Exeter by material

Each row starts from the installed price per square foot of deck published in a national cost guide, then moves only the labor part of that price by Exeter's labor index. For 320 sq ft:

MaterialNationalExeterMidpoint
Pressure-treated pine deck$8,000–$16,000$8,850–$17,700$13,300
Cedar deck$9,600–$15,050$10,450–$16,750$13,600
Composite deck$12,800–$25,600$13,650–$27,300$20,500
Pressure-treated$8,850–$17,700Cedar$10,450–$16,750Composite$13,650–$27,300
Deck building in Exeter, NH, for 320 sq ft: low and high estimate by material after the local labor factor. Bars to scale on one axis from $0.

By size

Deck area (sq ft)Exeter estimatePermit at midpoint
144 sq ft$4,000–$7,950$79.87
240 sq ft$6,650–$13,300$99.79
320 sq ft$8,850–$17,700$116.38
400 sq ft$11,050–$22,150$132.98

Pressure-treated pine deck.

Permit fee in Exeter

General rate The fee schedule has no separate line for this work; the town's general residential building-permit rate is shown as what it would charge if the building department requires a permit for it.

“Residential: $50 Application Fee + $5/$1,000 Permit Fee”

“Permit fees are based on the estimated cost of materials and labor for the improvements being done.”

“If the cost of the improvements is less than $1,500 only an application fee will be assessed.”

Applied to a 320 sq ft deck estimated at $8,850 to $17,700, that gives $94.25 to $138.51, about 0.88% of the midpoint price. Among the 17 towns on this site whose schedules cover this work, Exeter ranks 6 from the cheapest; Goffstown is lowest at $40 and Merrimack highest at $252.60 for its own midpoint job.

Goffstown$40Barnstead$50New Ipswich$64Portsmouth$110Newport$114Exeter$116.38Manchester$120.63Salem$128Londonderry$131.21Rochester$136Durham$142.94Somersworth$144.49Fitzwilliam$146Lebanon$160.65Newbury$164Conway$219Merrimack$252.60
Permit fee each town's schedule gives for the midpoint deck estimate in that town (320 sq ft). Bars to scale from $0; "from" marks a minimum fee.

Schedule: Town of Exeter Building Department Fee Schedule (revised 01/01/2024). The building department decides whether a permit is required and what valuation it accepts; the national guide puts deck permits at $50–$150.

Why Exeter differs from the national price

Exeter is in Rockingham County, which the Bureau of Labor Statistics counts in the Boston-Cambridge-Newton, MA-NH metropolitan area (mostly Massachusetts). The median wage there for carpenters is $36.16 an hour against $29.12 nationally, so the labor part of a national price is scaled by 1.242 (+24.2%). That area is mostly Massachusetts; the New Hampshire statewide median for the same trade is $29.42, so a Exeter quote may land nearer the low end of the range shown.

On this job the labor portion is $3,500 to $7,050 at national rates and $4,350 to $8,750 at Exeter rates, so the midpoint rises $1,300 above the national figure. Against the New Hampshire statewide wage it is $1,200 higher. Materials are priced at the national figure: shingle, lumber and equipment prices are set by distributors, not by a town.

A second published benchmark points the same way for the region: Remodeling's 2025 Cost vs Value report prices its “Deck Addition, Wood” job at $18,250 nationally and $20,600 in New England, and its “Deck Addition, Composite” job at $25,100 nationally and $25,800 in New England. Those are fixed specification jobs, not per-square-foot prices, so they are shown for comparison only.

Exeter at a glance

Exeter had 16,178 residents in the state's 2025 estimate, up 13.1% from 14,306 in 2010, faster than the state's 7.5% over the same years. Its density of 822 people per square mile puts it 7 of 19 among the towns on this site.

69.1% of Exeter's occupied homes are lived in by their owners, fewer than the 72.8% statewide, and the median owner-occupied home is valued at $456,600 (New Hampshire: $402,500). The midpoint estimate for this deck works out to 2.9% of that median value.

Before asking for quotes

Other projects in Exeter

Roof replacement cost in Exeter · Siding replacement cost in Exeter · Driveway paving cost in Exeter · Heat pump installation cost in Exeter

Deck building in nearby towns

TownLabor areaEstimatePermit
DurhamBoston-Cambridge-Newton$8,850–$17,700$142.94
LondonderryBoston-Cambridge-Newton$8,850–$17,700$131.21
PortsmouthBoston-Cambridge-Newton$8,850–$17,700$110
RochesterBoston-Cambridge-Newton$8,850–$17,700$136
SalemBoston-Cambridge-Newton$8,850–$17,700$128

More: all deck building town pages · permit fees by town · labor costs in New Hampshire

Sources

All figures checked October 20, 2026. Estimates are ranges built from published averages, not quotes; a contractor's price depends on the house, access, the season and the scope written into the quote. Cost by Town does not perform or arrange work.